Genuine Beta accessories are available at your
local Beta dealership!
Simple, Fast . . .Beta
ENGINE
This kit
upgrades your tensioner to the dirt tricks automatic cam chain tensioner.
This kit, part # DT-2010-TF, will quite engine noise caused by a
loose timing chain. DT-2010-TF $118.95
Cam Chain Tensioner Cap
Beautiful billet piece to enhance your ride! AB-12012 $29.99
Air Mixture Screw
Allows rider to adjust mixture with no tools.
Manufactured in the USA AB-20007 $29.99
Air
Box Cover
Goes in place of air filter while washing out airbox or while servicing
filter.
Made by Twin Air AB-10185 $32.99
Billet Gas Cap
Stronger than stock, for that factory look. AB-12009 $64.95
Oil Filler Cap
Will not distort under hot conditions, easier to remove.
AB-12013 (Sold Each) $19.99
Pre-oiled, in a sealed zip-lock bag. Dual stage design.
Very high quality!
Made by Twin Air AB-12001 $31.99
Race
Wire Loom
Eliminates all extra wiring. Retains electric starter and lights
only.
AB-10273 $107.95
Oil Filter Cap
Helps improve lap times! AB-12010 $29.99
Engine Oil Drain Plug
Easier to remove than stock plug. Made of billet aluminum.
AB-12018 $34.99
Clutch Cylinder
Guard
Used to protect the clutch slave cylinder. Note:does not work
with front sprocket guard or 15 tooth sprocket. Has Beta Logo
on front. Manufactured in the USA
AB-20009 $37.99
For tight trail riding conditions.
Turns on and off through the use of a thermoswitch.
Made by Beta AB-10274 $159.95
Engine Screw Cap Set
Includes four red billet caps to replace the stock black items. AB-12011 $24.99
Billet aluminim plug that includes a magnet for catching debris.
Made by Zip-Ty Racing AB-12004 $24.95
Add Bling to your Beta. Replaces the stock clevis on the rear brake
pedal.
Made in the USA AB-10202 $39.95
Tune-Up Kit
Includes
Pre-oiled Twin-Air filter, oil filter, 2 quarts Kalgard 10/40 synthetic
oil, sparkplug, and o-rings for oil filter cover & drain plugs AB-14000 $79.99
Dual
Map CDI – 400
Alters ignition timing for quicker snap for premium conditions or
slower rev for muddy conditions. Includes handlebar switch. AB-12111 $349.99
Dual
Map CDI – 450
Alters ignition timing for quicker snap for premium conditions or
slower rev for muddy conditions. Includes handlebar switch. AB-12112 $349.99
Dual
Map CDI –520
Alters ignition timing for quicker snap for premium conditions or
slower rev for muddy conditions. Includes handlebar switch. AB-12113 $349.99
Billet Oil
Fill Plug
Easier to remove than the stock plastic plug. Will not melt under
extreme heat.
Has Beta logo on top!
Made in the USA AB-20006 $19.99
CHASSIS
Beta Racing
graphics for the oversize 3.8gal fuel tanks.
AB-12028 $69.99
3.8 Gallon Tank (Clear)
Price: $218
AB-12027
3.8
Gallon Tank (Black)
Price: $218.00
AB-12027BK
3.8 Gallon
Dry Break Tank (Clear)
Price: TBA
AB-12027DB
Radiator
Guards : protection for you radiators from brush and crash damage.AB-10124
Extra soft
seat foam : for those with an extra sensitive tush
AB-10499
Stainless
Steel Filter : reusable oil filter
AB-12002
Rear Rack
Strong, sturdy rack that fits as good as it looks. Increases
traction the more you load it up!
AB-12032 $159.99
PHDS
Handlebar Mounts : The supports, provided with elastometers, better
absorb the vibrations and provide improved riding comfort and reduced
fatigue. · included with 10mm spacers to use as an option· Fits
all years RR/RS AB-12100
ARC Folding
brake lever : Helps prevent bent and broken levers in
the event of a crash
AB-12110
ARC Folding
Clutch Lever 2012 w/Brembo Master Cylinder : Helps prevent
bent and broken levers in the event of a crash
AB-12132
Brake
Pedal Tip
Machined billet, titanium in color.
AB-12021 $39.95
DT-Sprkt-
XX- Iron Man Sprockets : Super light steel sprockets with one
year guarantee against wear. Specify size in last two digits
available in sizes 41 – 52.
ARC Folding
clutch lever : Helps prevent bent and broken levers
in the event of a crash
AB-12109
Billet aluminum "shorty" clutch lever.
Anodized adjuster included. Works well with
hand guards.
AB-10186 $69.99
Billet
Folding Clutch Lever
Folds outward to avoid damage, a work of art!
Machined from Billet aluminum.
AB-12015 $89.99
Billet
Folding Brake Lever
Folds outward to avoid damage. Machined from
Billet aluminum.
AB-12016 $89.99
Rear Rack
Strong, sturdy rack that fits as good as it looks. Increases
traction the more you load it up!
AB-12032 $159.99
Includes aluminum mounts. Moto inspired design AB-12108 $29.99
Designed to add bling to your Beta. Should make
you go faster!
Made in Italy
AB-10188 (red) $79.99
Scotts stabilizer
50mm, Position 2 (one back)
The Scotts Steering Stabilizer is a compact, fully adjustable, hydraulic
shock absorbing stabilizer that mounts to your steering head area.
AB-11282 $499.00
Scotts stabilizer
50mm, Position 3 (stock position)
The Scotts Steering Stabilizer is a compact, fully adjustable, hydraulic
shock absorbing stabilizer that mounts to your steering head area.
AB-11283 $499.00
Scotts stabilizer
50mm, Position 4 (one forward)
The Scotts Steering Stabilizer is a compact, fully adjustable, hydraulic
shock absorbing stabilizer that mounts to your steering head area.
AB-11284 $499.00
Scotts stabilizer
50mm, Position 5 (two forward)
The Scotts Steering Stabilizer is a compact, fully adjustable, hydraulic
shock absorbing stabilizer that mounts to your steering head area.
AB-11285 $499.00
Saddle
Bag
Made in the USA by Giant Loop. Ideal for long
dual sport adventures.
AB-12031 $219.99
Tank
Bag
Made in the USA by Giant Loop. Bag zips off
base to remove. Best bag in the business!
AB-12030 $164.99
Fits all stock and billet clamps for your Beta.
Manufactured in Italy AB-10135 $149.99
Billet Chain
Blocks
(fits all Betas)
Machined location lines for perfect chain adjustment
AB-10280 $69.95
Billet rear brake
pedal
Stronger than stock, made from pure Italian billet aluminum. Brake
pedal tip can be adjusted. (uses stock pedal tip, not included) AB-12017 $195.95
Billet Folding
Clutch Lever
Folds outward to avoid damage, a work of art! Machined from
Billet aluminum.
AB-12015$89.99
Billet aluminum "shorty" clutch lever.
Anodized adjuster included. Works well with hand guards. AB-10186 $69.99
Billet Folding
Brake Lever
Folds outward to avoid damage. Machined from Billet aluminum.
AB-12016 $89.99
Designed to add bling to your Beta. Should make
you go faster!
Made in Italy AB-10188 (red) $79.99
Designed to add bling to your Beta. Should make you go faster!
Made in Italy AB-10187 (black) $79.99
Beta
Factory Pegs
E xtra wide for better support.
Stainless pins for added boot grip.
Manufactured by Beta/Boano AB-10101 $219.99
Brake Pedal
Tip
Machined billet, titanium in color.
AB-12021 $39.95
Gripper
Seat Cover
Built in pouch to hold score card or map
$89.99 AB-11002
Povides a smooth throttle. Aluminum end cap included,
can be removed to work with hand guards.
Made in the USA AB-10134 $63.95
Turn your Beta into a weekend canyon bike! Kit includes 17" Rims,
hubs, hardware, bearings, shorter side stand, and front fender.
*does not include tires*
Manufactured by Beta AB-12008 (2009-2010) $1299.00
Carburetor Fuel Mixture
Wrench
For easy adjusting of the fuel-mixture without
removing carb.
AB-15000 $39.99
Front Sprocket (12
- 15 tooth)
AB-13007-12 AB-13007-13
AB-13007-14
AB-13007-15
$22.99
Rear
Sprocket SILVER (45 - 52 tooth)
Lightweight Aluminum Rear Sprocket
AB-13008-45
AB-13008-48
AB-13008-49
AB-13008-50
AB-13008-52
$59.99
Rear Sprocket Black
(45 - 52 tooth)
Lightweight Aluminum Rear Sprocket
AB-13009-45
AB-13009-48
AB-13009-49
AB-13009-50
AB-13009-52
$64.99
SuperSprox
Dual Red/Black
(48 - 52 tooth)
Designed by Super Sprox
Aluminum inner hub with steel sprocket teeth.
AB-13010-48
AB-13010-50
AB-13010-52
$84.99
Euro Racing Graphic Set
Same Graphics used by Beta Euro Team
$149.99 AB-11001
'10/11
Race Graphics
Same Graphics used by Beta USA Team. Looks
great with gripper seat cover #AB-11002 (not included)
$149.99 AB-11000
Rim Decal
Set, Red
Kit Includes enough decals to do one bike front and rear.
AB-10278 $45.99
Rim
Decal Set, Black Kit Includes enough decals to do one
bike front and rear.
AB-10279 $45.99
Includes 5mm billet spacer. Installs under the stock handlebar mount.
AB-10189 $28.99
Includes 10mm billet spacer. Installs under the stock handlebar mount.
AB-10190 $28.99
Includes 20mm billet spacer. Installs under the stock handlebar mount.
AB-10191 $28.99
Bar Risers, 30mm (red)
Billet
red aluminum bar riser. AB-10192 $59.99
Beta
License Plate Support Nice aluminum support for mounting your plate.
AB-12059 $42.99
Beta
Racing Solid rear brake rotor. Solid rear brake rotor collects less
dirt and extends brake pad life. AB-10171 $187.99
New
composite lever!
20x stronger than aluminum! Lifetime Warranty!
AB-12109 $64.99
New
composite lever!
20x stronger than aluminum! Lifetime Warranty!
AB-12110 $64.99
PROTECTION
Carbon
Skid Plate
Better protection of side cases. Prevents mud build-up under
engine. Very light!
$219.99 AB-12019
Factory Beta hand guards. Easy to install. All mounting hardware
included.
Made in Italy AB-10108 $64.99
For use with AB-10165. Provides excellent hand AND clutch/brake protection.
Made by Enduro Engineering AB-10168 $24.95
For use with AB-10165. Provides excellent hand AND clutch/brake protection.
Made by Enduro Engineering AB-10167 $24.95
Soft Seat
Foam
Great for those long rides!
$69.95 AB-10500
Developed by Enduro Engineering for Beta. Fits all Beta handlebars.
Hand guard wings sold separate.
Made by Enduro Engineering AB-10165 $78.99
Billet aluminum, for the rocky sections.
Manufactured in the USA AB-10389 $149.99
For use with AB-10165. Provides excellent hand AND clutch/brake protection.
Made by Enduro Engineering AB-10166 $24.95
Tall Seat
Foam
Adds about 1 ½ “ to seat height. Designed for riders
over six feet tall.
(*Must use seat cover AB-10502)
$69.95 AB-10501
Gripper
Seat Cover
(tall foam)
Larger cover to fit tall seat foams
$69.95 AB-10502
Gripper Seat Cover
(standard foam)
Fits standard height seat foams
$69.95 AB-10503
Beta Racing
Flag-style Handguards
Includes aluminum mounts.
Moto inspired design.
AB-12107
$89.99
Set
Red rim,black hub, black nipples. 18” & 21" AB-12042 $1159.99
Set
Black rim, red hub, red nipples. 18” & 21” AB-12043 $1159.99
Set
Red rim,black hub, black nipples. 19” & 21" AB-12044 $1159.99
Set
Black rim, red hub, red nipples. 19” & 21” AB-12045 $1159.99
Carbon Fiber
Frame Guards
Beta Racing Designed. Looks cool and won’t melt! AB-12114 $199.99
Includes wheel bearings.
Also includes rear brake rotor and rear sprocket (not shown).
Tire not included.
Made by Beta AB-10104 $769.00
Includes wheel bearings.
Also includes front brake rotor (not shown).
Tire not included.
Made by Beta AB-10103 $649.00
EXHAUST
FMF
Powercore
Add performance to your Beta! Includes removable spark arrestor screen.
Manufactured by FMF. AB-12108 $299.00
This is a complete system that includes a removable spark arrestor,
quiet inserts, carbon fiber guard, and spring tool. Saves 5 lbs!
Made in Italy AB-10272 $1099.00
FMF
Q4, 10/11
Add performance to your Beta! Includes removable spark arrestor screen. Manufactured
by FMF. AB-10270 $359.00
FMF
Powerbomb header Up to a 10% increase in horsepower!
AB-10269 $219.99
SUSPENSION
For all 50mm Marzocchi Shiver forks. Sold as a set.
Manufactured in the USA
AB-10123 $39.99
Billet Racing
Triple Clamp Set
Includes PHDS handlebar mounts. Adjustable offset. Works with stock
or factory 50mm forks
$799.99 AB-12106
50mm Factory
Fork
50mm Dual Chamber Marzocchi. Amazing Performance! Can be installed
with stock clamps or billet racing clamps #AB-12106 (not included)
